Quote:
Originally Posted by Erics_New_z06
Ok, first off, thanks in advance. Second, I did do some searching, and I know that this has been asked before, but many of the answers were 5 years old which I dont find very useful (opinions could have changed a lot)
Anyways, here is where I am. I have a completely stock 2002 z06. I live in Salt lake city, so at this altitude I could use a little forced induction.
I dont really like the look of high rise hoods, but it seems that from my searching, the mag is the easiest to install and the most trouble free which is nice. However, the downsides are; too much low end torque and the subjectivly ugly hood...right?
So that kind of leads me to get an ATI, but I've read several posts saying that they are problematic and not the best route for a daily driver. So .....has this changed over the years? Are ATI's more reliable?
If you wanted only around 4-5 lbs of boost, and want a relatively trouble free set up, which do you suggest?
|
Yes, IMHO ATI Procharger's systems are much improved over the last 5 years once they started putting as much R&D into the 'system' as they had previously put in the 'blower unit' itself.
Throw on a P1-SC with 5-6 lbs boost, get it properly tuned and you should run trouble free.
Mike
