|
Re: Valve Stem Seal Replacement
LeRox,...man I apologize. I wasn't thinking. The tool I have I got from Thunder Racing back in the LT1 days. I think the valve stem seals for the LT1 is 11/32..a touch small than the LS motors...I could be wrong about that. You might call them,or any of the shops for that matter, and see if there is a tool for the LS motors....I would assume there is. But, anything that slides over the valve and allows equal pressure on the seal should work...deep socket, small plastic tubing, etc... it doesn't take much to seat them.
__________________
2003 Yellow Z06: Comp Cam, TI retainers, Halltech Venom, SVO 30# inj, Water/Meth injection, Katech ported TB, TB bypass, underdrive pulley, Kooks LT, BB bullet exh, No cats, RPM trans/diff 3.90, exedy twin disc, BPP shifter, dyno tuned...etc...
1969 Mach 1 big block being restored
|
