|
Re: Valve Stem Seal Replacement
actually, the LT1 tool might work....The valve stem seal is 11/32 (.344") and the OD is just a touch bigger according to what I can find from parts supply places online. The LS valve stem seals appear to be .500 x 8mm (.315"). So, the LT1 tool might be slightly bigger but still might work. Just throwing it out there...if it was my car I would want to be sure.
__________________
2003 Yellow Z06: Comp Cam, TI retainers, Halltech Venom, SVO 30# inj, Water/Meth injection, Katech ported TB, TB bypass, underdrive pulley, Kooks LT, BB bullet exh, No cats, RPM trans/diff 3.90, exedy twin disc, BPP shifter, dyno tuned...etc...
1969 Mach 1 big block being restored
|
