|
Re: OK to use DOT 4 Brake Fluid?
Quote:
Originally Posted by DennyM
Motul 600 is suitable for use in systems requiring DOT 3 or DOT 4. It conforms to FMVSS#116-DOT 4 Motor Vehicle Brake Fluid. It is compatible with DOT 3 fluid.
There are some who warn against using DOT 4 or using synthetic ... personally, I figure that the companies have done their research.
I've been using Motul 600 in my brakes and clutch for 6 years.
You don't *have to* do a Tech II purge; tho C4C5 Specialist says that's the only way to do a complete purge. If, as some recommend as a field expedient, you do a couple ABS activation cycles to run the new thru the ABS reservoir, you still may not get all the old fluid out - the net result is that you will not have a "pure" DOT 4 performance boiling point.
|
OK ..This does raise the question...are the two fluids compatable...ok to mix them ?? Will there be some bad reaction ?
__________________
Montana: So Many Z06 Roads...So Little Time Z06/Z16#1571
|
