Hi Sub, thanks for responding!
Quote:
|
Originally Posted by Subdriver
You'll need the right size splitter to pop the upper, lower ball joints on the spindle and the ball joint on the tie rod. I bought a set from Sears and was okay there.
|
Is that the exact name of the tool, a 'splitter'? Also, what size do I need? As soon as I get off of work, I'm heading over to Sears to buy one. I've officially chickened out!
Quote:
|
You'll also need a 34mm socket to get the axle nut off and those are hard to find. I ended up getting a 34mm impact wrench socket from Napa.
|
I'll be going there too...
Quote:
|
As a note, I have the shop manual and followed that without much heartache.
|
I do have the shop manuals.
