For Sale-bfg Drag Radials, Baer Rotors, Tnt Nitrous Kit, & More

[scottr]

I recently was forced to sell my ’02 Z06 with only 4300 miles on it due to divorce. I removed most of my mods to help recover my investment and I now have these items for sale and listed below. I can take and send a digital photo for any item if requested. Also, if you're coming to the Z06Fest I can give it to you there. I live in Bowling Green, KY and I am an Engineer at the GM Corvette Plant so meeting up with you this weekend would not be a problem. That would save some money on shipping charges. Let me know if you're interested.

CORVETTE Z06 CHROME WHEELS & BF GOODRICH DRAG RADIALS -Two like new and in perfect condition Corvette Z06 replica 18x10 chrome wheels with BF Goodrich 315/30-18 G-Force drag radial tires mounted on them. The wheel/tire assemblies are static balanced and have only been mounted and ran on my car once. They have only seven ¼ mile passes on them with no burnouts plus the mileage to and from my local drag strip. So if I had to guess, I would say they have about 20 miles of street driving on them. They hook really hard on the street as well as at the track. Chrome center caps are included. $1000

BAER ERADISPEED 2 PIECE DRILLED/SLOTTED FRONT & +1 REAR BRAKE ROTOR SET-These rotors are in excellent condition with approximately 2300 miles on street driving on them. They have never been abused and have no road course use or any extreme use for that matter. I had them installed on my Z06 with chrome Z06 wheels and I think they looked awesome. All mounting brackets and instructions are included as well as the original packaging. $750

VARARAM VR-1B RAM AIR INTAKE SYSTEM-This system was only on my Z06 for about 8 months and approximately 2300 miles. The filter doesn’t even look used. I really forgot how much of a difference this intake made in performance until I put it back to stock. $250

TNT LS1/LS6 WET NITROUS KIT-This kit is new, never used. The kit number is F-1003-10 and is adjustable from 75-150 rear wheel horsepower. I special ordered this kit from TNT with the satin aluminum finish power ring instead of the standard purple one. This kit was removed from package and only partially “test” installed on my ’Z06. The power ring was installed onto the throttle body and the solenoids were mounted to the C5 Corvette solenoid bracket and mounted to the intake manifold to check for fit. Kit comes with a “full” 10lb nitrous bottle. Also included is a black high flow smooth power coupler that has been trimmed to work with the power ring. $650

MSD RPM WINDOW SWITCH & 3K & 6K RPM MODULES KITS-New in package. $100

STORMSHIELD RED/BLK TWO TONE C5 CAR COVER-Cover is like new. Only has been on a car a few times. Fits very well and makes the car look awesome covered up in the garage. $200

172 DEGREE THERMASTAT & THROTTLE BODY COOLANT BYPASS- These items were only on my Z06 for about 8 months and approximately 2300 miles. $50

[1 slow 97]

sent you email about the vararam. if you dont receive it, please email me at jaugerinos@aol.com. Thanks!

[NETfiend]

ttt

[FirstGear]

let me know...sent you PM.....

[scottr]

Vararam, Stormshield Car Cover, and Thermostat have been sold.

BFG 18" drag radials mounted on chrome Z06 wheels, TNT nitrous kit, and Baer brake rotors still for sale.

Send me any questions or offers.

Thanks!

[John77]

I meet Scott this weekend, and saw the rims and Drag radials. They are in the condition he advertises nice set up.

John

[scottr]

Baer Rotors have been sold.

[XpenceO]

I could be interested in the drag and rim package

what is the best price you can offer? shipped to So. Cal

Thanks

[XpenceO]

Scott Don't sell the G-force/Rims - - I neeeeeeeed them

Please! I just sent you an e-mail.

Thanks

The 150 shot F-body -02 Camaro - that is all up in my ear - everyday at work... My close bro that makes it all worth it ....
He must go down !! He just ran his best 12.20 @ Carlsbad, CA @116 ... constant incessant going'z on about
how fast..blah...blah - - -- 399 RWHP on the button
(sorry it is tuned down to about 90 shot - right now)
Don't get me wrong he has proved it - - ahmm - - The first Rev-limited night i had my 02 Z - stock - ....mid-end only == he walks
1 car (NOS 90shot on) and then seems to slow in his running...by this time we are at 120 mphish and backing down. several times we did this type of play from about 40 mph....my brain just couldn't shift that early..not used to the wine of the rpms... bounced the limiter at least 5x's..(This is midnight - dry/clear - deserted canyon roads with long str8 aways...) -- but none the less... He has intake, gears, exhaust, shift kit, 75-150 shot.
(THIS A VERY CLOSE FRIEND, BUT HE ACTS LIKE IT HAS 700 RWHP
and TIRES to HOOK, which is not the case - and that I have the total disadvantage on the stick, etc..... I know experience is needed with my new environment, that will come...) I have only had it for 3 months - he has the camaro close to 24 mos.
hehehehe - -I keep adding to this post - -okay so we did one other - serious staged small street race (approx. 1/16 mile - at the light in front of work one day. One of my better launches and we were pinned togther - even as he squeezed in 2nd...then the lanes bank right into a single lane.. had to back down... but 3rd is where he would have pulled... point being with right conditions
he is not - just killin the stock Z w/ g-force at the strip - me stock.
(he ran a 12.20) some Z06 people claim to beat that with good tires, stock..... right ..??. so I want to bust 11.2's when I am done with this 1st. round of mods....heads/headers/cam/NOS_150/LS1edit

(Question: Do I need a Frickin roll cage or what? Sincerely..should I be worried about having one -at this level - -or more if it were in the 10's..? )

SOOO ... another former C4 / 383 ported beast owner - now cashed out on a F-body project dude...is hoping to dominate both myself and the talker in focus at the strip...... - -We all work together.... I have to Torch these guys up!.. Hence the need for these Drag Slicks, Scott!

Mine is in the Race Mechz garage - ripped in pieces
with heads in core exchange status (out of state ), tranny driven to a friend of his - GM tran specialist (said something about a synchro adjustment -? - and other adjust.-) custom clutch disc being cut - Then a 150 shot - twin bottle system... I'm hoping the JBA shortys work good enough...to blow some serious HP out of them. - - Things I wish I could afford - - Roller Rockers - - Custom Intake - (of course SC/TT - but that is in another dream )


Thanks for listening - Good Night

[Chicago ZO6]

please send pics of hte BFG setup to wburkett@taurustechinc.com

[wvphoto]

anyone know this guy.. ?
i am going to BG tomorrow to get the vette..
i will have the truck..
would like to get the chromies and bfg drags..
anyone know him have him call my cel
3045462220
mike hall

[kent menges]

is the tnt set still for sale?

[wvphoto]

oh yea..
i brought home some drag radials today @!!!
thanks scott..
they are cool
i will be putting them on tonight ..
just to burn up the neighborhood !!!
LOL

[XpenceO]

I'm jealous wvphoto - -I couldn't allocate the $ in the right timing... went with a 6 point wolfe racecraft cage with dual swing outs.... heads just showed up from being ported in AK. :-)

I'm going to be posting a new thread on a yellow Z06 custom PC that I'm going to sell... please spread the word guys... trying to fuel the project....want to break into the 10's....

Peace

[HELLYA 1]

would you be willing to sell or trade the satin aluminum finish power ring I have the puple one and don't really care for the color.