Show me you’re LS2 Throttle Bodies

[donpattyz06]

Just purchased and polished an LS2 throttle body. I would like to see pics of the TB on a C5 Thanks.

[PerforminNorman]

Kinda boring, but here you go. LOL

[Jim Lembo]

Here's a few more for you Don:









Jimbo

[donpattyz06]

Thanks, a couple of questions. The LS2 doesn't have a port on the throttle body to connect the PCV fresh air line to the valve cover like on the stock LS6. So where do you connect the PCV fresh air line when installing the LS2 90mm TB?
What size silicone air duct/coupler/reducer, whatever it is called, is needed?

[Pit Man]

Originally Posted by donpattyz06

Thanks, a couple of questions. The LS2 doesn't have a port on the throttle body to connect the PCV fresh air line to the valve cover like on the stock LS6. So where do you connect the PCV fresh air line when installing the LS2 90mm TB?
What size silicone air duct/coupler/reducer, whatever it is called, is needed?

I have a Vararam air intake on mine. There was a flat spot on the side of the plastic so I drilled a hole and screwed in\glued a brass fitting from an air compressor air line, then ran 3/8" fuel line from the valve cover to the brass fitting. My Z is in the shop or I would send you a pic. Only takes about 15 minutes.
Pit

[Pit Man]

Originally Posted by Jim Lembo

Here's a few more for you Don:









Jimbo

JIMBO, YOUR CRAP IS TOO CLEAN !!!!!!!!!! Go kick some butt at W-Fest
Pit

[Jim Lembo]

Originally Posted by donpattyz06

Thanks, a couple of questions. The LS2 doesn't have a port on the throttle body to connect the PCV fresh air line to the valve cover like on the stock LS6. So where do you connect the PCV fresh air line when installing the LS2 90mm TB?
What size silicone air duct/coupler/reducer, whatever it is called, is needed?

I just got a small air filter for the line that went to the stock TB from the valve cover. It's not in the pictures because I hadn't installed it yet.
The red coupler is a direct replacement for the stock accordian coupler. It stretched enough to fit over the 90mm TB opening.



Jimbo

[Jim Lembo]

Originally Posted by Pit Man

JIMBO, YOUR CRAP IS TOO CLEAN !!!!!!!!!! Go kick some butt at W-Fest
Pit

Pit,
You call that clean? did you notice how grungey the brake master cylinder is? I do plan on kicking some exotic butt at the winterfest.
Should be fun!

[Pit Man]

Originally Posted by Jim Lembo

Pit,
You call that clean? did you notice how grungey the brake master cylinder is? I do plan on kicking some exotic butt at the winterfest.
Should be fun!

Jimbo,
If that Blue-puppy of yours nicks the tens...you call my cell...I wanna know !!!


Pit