If you're going to order the OEM parts, please check with our newest forum sponsor, Fairway Chevrolet, who will give you a MONSTER DISCOUNT on OEM parts! Check 'em out !
Just finished putting one on mine. Not too difficult.
You also need 2 bolts to mount the antenna to the bracket and 3 pieces of wire, each 12" long to do the wiring.
The bolts are $4 each. Probably get them for .50 at a hardware store.
Allow more than 1 hour.
Dave
I didn't completelydo away with the fixed mast, but I did go with the "Shorty" mast from Jake Delaney (Corvette Concepts). I'll try to get a photo up soon. Had three different chicks say it looks "Sexy". Sounds like a good reason to make the change
Joe
__________________
Joe Syslo
'75 AWhite/Blue T-Top Shark (???)
'99 NB/ Black FRC (324.4 RWHP)
'02 EB/ Mod Red Z06 (356.3 RWHP)
I like the idea of a power antenna... but would like it to only raise when on radio. Is there a way to wire it in to do that? I noticed that the article "got around" that by putting in an override switch that kept it from raising... but this is not an elegant solution.
Maybe I will have to change out the head unit to get an antenna power lead that works.
How does the power antenna on the coupe/vert that came with it work? always raise when the unit is on?
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Speedway White / Z06 With -
-plate-
-
Linear Mode
