Billet Prototypes Monster Clutch Holiday sale!! Get $100 off!!

[jamesbiz]

Well it is that time of year again. To celebrate these festive times, we will be offering $100 off all clutches.

And here is the real kicker guys, at the end of each week, one lucky customer will get his or her clutch for FREE! You read that correctly, absolutely FREE! At the end of each week every customer who purchased a Monster Clutch will get their name thrown into a hat, and whoevers name comes up, you win a free clutch!

All of our clutches have a full 12 month warranty against manufacturers defects and come as a complete kit! A lot of homework has been done and we are very proud of this accomplishment! Clutch are all engineered from the ground up to meet and exceed any standards set by other manufactures. You will not find another clutch like this out there even close to this price range.

All hp ratings are to the wheels in order to give real world numbers to make purchase easier. Ratings are all conservative minimums and will only start slipping after it goes above and beyond the numbers. Please contact me and I will figure out just the right clutch package to suit your needs. I'm always here to help.

Here is a breakdown of our kits that we offer. Please click on underlined links to learn more.


Monster Level 1 - 425hp/tq
Great for the street, basic mods, minimal drag racing with stock weight flywheel. This clutch was designed as a stock replacement, only, a bit beefier. Clutchs features a Heavy Duty Pressure Plate and SFI certified billet steel flywheel or chromoly lightweight 15LB flywheel which makes this one stout stock replacement! We’ve taken the worry out of the organic clutch with the Level One



Monster Level 2 - 525hp/tq
Great for a street/strip car, moderate mods, moderate drag racing with stock weight flywheel. The Level 2 clutch is one of the best dual friction clutches on the market today!It was built off of the successful Level 3 Clutch and have had fantastic results. What do you get? How about a 525hp/tq rating out of a clutch that has a butter-smooth engagement? Do a lot of “roll racing”?



Monster Level 3 - 700hp/tq
Great clutch for those who are looking to get the most out of racing, good street manners, great for h/c or FI cars that take their car to the track regularly. Now we’re talking! This thing is the pinnacle of cera-metallic clutches! Want a clutch you can throw 700 hp/tq at without batting an eye? Want a clutch you can feel confident launching a 4,000lbs car at 5,000+ rpm on? Want something that will take a beating at the track and keep begging for more? No need to jump to twin's or triples in order to have a high hp car. Unlike what is said about a lot of puked clutches, this clutch will not chatter if installed and broken in correctly.



Monster Level 4 - 775hp/tq
Same thing as a Level 3, just for those guys that have a little more power. Just when you thought the Level 3 was the best, we bring you, the Level 4. This is for those guys teetering on the 700hp/tq mark and really want a clutch that will handle the abuse! This clutch has all the great things that the Level 3 has, except, it has a “stickier” disc. Make 775hp/tq? While the level 3 can handle the majority of power levels on the street, level 4 is a little bump above, but will wear just a tad bit faster.




Monster Level 5 - 825hp/tq
Serious clutch, grabs hard, great for the track, liveable on the street. Handles FI, Nitrous, and Strokers with ease. Taking a single disc to places people say they couldn’t go. The Level 5 is a testament to our involvement with major clutch manufacturers, and it shows. Do you have a car that makes (dare we say) 825hp/tq? Get in here!



Monster Level 6 - 900hp/tq
Same thing as a level 5, just for those who have a very serious street car. Blasphemy! That’s what most people say when you tell them you want a single disc clutch that will hold 900hp/tq! Impossible! That’s another term that comes to mind. Well, there are only a few of you guys out there that are crazy enough to push your LS based motor to this point and still be bangin’ gears! So, if I’m talking to you, get in here!


Finally, everyone has an affordable clutch solution that won't fail! And if for some reason they do, you have a company that is willing to stand behind everything they sell, a company that has just as much invested in its customers than they do in our clutch, and more importantly, a company that won't run after a few sells!


**All prices above are kits minus a slave cylinder, you will be shipped the following in these kits; Pressure plate, disc, billet steel or light weight flywheel, pilot bearing, release bearing, and an alignment tool. If you would like a slave cylinder please add $70 to the price . All options are on the site.

[jamesbiz]

• We have discontinued all x.5 clutches to make room for the twin disc units that will be releasing at the end of the year.
• The new Level 1 and 2 clutches will be the same as the old Level 1.5 and 2.5's. These combinations proved to be outstanding for the power rating that they are in and we chose to continue to use these and discontinue the old materials.
• We "tweaked" the Level 3 and 5 discs to have a smoother engagement and a slightly longer life without altering their already stellar holding capabilities. Remember, these clutches will NOT chatter after the 500 mile break in!
• We "tweaked" the Level 4 and 6 discs to have a smoother engagement and a slightly longer life without altering their already stellar holding capabilities as well. Remember, these clutches will NOT chatter after the 500 mile break in either!
• We decided that the Level 3.5-6.5 will not be needed due to the new twin disc units releasing. Having 12 single disc clutch offerings along with 3-4 twin disc setups was just too much, we chose to eliminate these and use the basic twin that we will offer to replace these units; not only will the basic twin hold up to (an estimated) 850hp, it will also be butter smooth and will take a beating when necessary.
• We are proud to announce our 11" Racing Clutches! These units will be for the avid enthusiast that is looking for a decrease in mass and isn't worried about a little chatter and a stiffer pedal. These clutches will offer 3500+lbs plate loads with only a modest 18% pedal effort increase and will only come in two flavors; a Ceramic and an Iron setup. The Ceramic clutch will hold 850hp and the Iron will hold 950hp, these units are designed to be abused relentlessly. Expect pricing to be slightly less than the current Level 3 and 4 units available right now. We have them in stock and are working very hard to get them on our site.
• The twin discs... I know you guys have been waiting patiently for a release date. I will tell you right now we have everything ready to go with the exception of the flywheels. Once we get those here it's off to SFI and then on to the production line!