Forced Induction

[Souljah]

I have a new z06 and i want twin turbo what is the best kit avalible?

and then what is the best kit available for like 20k.

[MikesZ06]

Not sure what the best TT set-up is, but since you posted this in the C6Z section, I will assume you have a 427 C6Z.

Word of caution...be careful of the FI setup you choose and especially the amount of boost you run. The LS7 engine is a very good motor but the pistons are not forged and the CR is very high for FI applications without further mods. Don't get me wrong, it can be done but 'moderation' is the watchword here unless you plan on doing some things with the pistons and/or heads.

Mike

[GR8 WHITE]

Welcome to the forum Souljah and wow, what a first post! If you are going to think, THINK BIG, huh?

GO FAST or GO HOME?

There are many knowledgeable folks on this site who will help you and steer you in the right direction but remember, the final decision comes down to you.

Mike is one I have consulted in on numerous occasions and as a Forced Induction guy running in the 9s, I trust his knowledge, advice, and suggestions.

Now, if you are looking to spend $20K, I am sure you can get a nice forged block with a D1SC for "About that" and put down over 750 rwhp. But keep in mind, if you want to play, you are going to pay. And when you got that much HP, things break. So, let the mod wars begin....

Good luck!

[Don Benson]

ECS in NJ did this to their own C6-Z06 over two years ago...here is a link to the thread.

Tt C6-z06


Give Chris at ECS a call if you want to have a TT installed in your car.

[ZO6 AL-X]

STS. Welcome aboard.