Z06Vette.com - Corvette Z06 Forum - View Single Post - Adding ZR-1 style front splitter
View Single Post
post #2 of (permalink) Old 05-10-2019, 06:11 AM
CTYANK2
Junior Member
 
CTYANK2's Avatar
 
Join Date: Apr 2008
Location: Simsbury, Connecticut
Posts: 25
Re: Adding ZR-1 style front splitter

First, if you are not going to be driving over 100mph you don't need the factory support behind the bumper. I drove my 2006 Z for almost 6 years with an aftermarket front splitter. I had a few track days and short bursts up to 130 with no support behind the bumper. No issues.

For my 2011 Z I did have the front bumper support installed by a local Corvette shop for a couple of hundred dollars. The install of the front splitter is easy to do yourself.

In my opinion there isn't any material difference between aftermarket ZR1 splitters and the factory one.

I would not waste your money on a carbon fiber front splitter. I've damaged a few splitters over the years from various highway junk, steep driveways, curbs, etc. Unless you just drive to car shows you will probably get some damage. The composite splitters are easy to fix and cheap to replace. I recommend flat black paint which is very forgiving and easy to repaint.
Attached Thumbnails
Click image for larger version

Name:	20170418_182444.jpg
Views:	31
Size:	39.5 KB
ID:	12763   Click image for larger version

Name:	20161204_093611.jpg
Views:	34
Size:	101.9 KB
ID:	12765  
CTYANK2 is offline  
 
 
For the best viewing experience please update your browser to Google Chrome