[FUBU69]

I had my Z lowered front and rear to the lowest settings. In fact I had the after market lowering bolts installed in the rear for additional lowering. Front now seems a little high. Should I have the front bushing trimmed to get front lower or just raise rear to even up? Will cutting the front bushings make the front too low?? TIA FUBU69/LES

_________________

Corsa Indy's/Pro Tips, Corsa X Pipe, Vortex/Carbon Fiber Power Duct, Z06 Wet Okles Mod Red Seat Covers, Z06 Extra Wide Rolled Exhaust Plate, Red/Clear Euro Lenses, CM Factory OEM Chrome Wheels and STILL EVOLVING! On Order, '02 EB Z06 TPW 7/23 Order#DKMKC7 KEEPING BOTH, I HOPE!

 

[hcvone]

Les, GMAN has taken his front bushing out of his FRC, his car is very low.

_________________
Carl V. *****Authorized Zaino Distributor*****
Huntingdon Valley, PA.
2002 Z06 Electron Blue - on order with build date
**FOR SALE** 2000 Magnetic Red Convertible **FOR SALE**
** Corvette Club of Delaware Valley **
www.hcvind.com
E-Mail: [email protected]

 

[FRC Tom]

Les,
Don't make the same mistake I did after I used the rear lowering kit, get that nose down.
You might want to read this I posted in March.
Mongoose in Pieces!!!!!!!!
http://www.z06vette.com/phpBB/viewtopic.php?topic=5298&forum=5

 

[FUBU69]

Tom, I have the nose at the lowest setting. Should I cut the bushings or raise the rear a little? Les Btw That post shook me up Bro!

 

[fcalmes]

FUBU's lowered Z06... /phpBB/images/smiles/icon_cool.gif

 

[VPRKLLR]

Hey Les,

Check with: bwhitmore
his Z06 is really low. /phpBB/images/smiles/icon_eek.gif

Try this tread: http://www.z06vette.com/phpBB/viewtopic.php?topic=8619&forum=1&13

The Z is looking good. /phpBB/images/smiles/icon_biggrin.gif /phpBB/images/smiles/icon_biggrin.gif

 

[AgentZ06]

FUBU- Your car looks awesome!

I see what you mean... just barely.

Have you had any problems so far with the lowering?

I would take that into consideration before lowering the front. Your car looks great though.

 

[FRC Tom]

Les.
That's what my car looked like before she started to fly. I am not one for cutting my bushings but many have.
Just keep it under 110 mph until you decide what you are going to do.
These cars are designed to have the air blow over the top and when the nose is lifted up it is too easy for the air to get under the car.
Please be careful.

 

[FUBU69]

Thanks AGENT! I'm going to have to buy a fork lift to help get me in and out! LMAOL!!!FUBU69/LES