Corvette Z06 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
259 Posts
Any alignment shop that has been around for a time should be able to do the job . Todays alignment machines are computerized so anyone that can read the monitor and turn a wrench should be able to set the alignment to stock specs . The computer has all the numbers all they have to do is turn the wrench till the numbers match. All this being said if you are going racing then you will need some one with talent and knowledge. I personally use a shop that's been in operation for the past twenty five years :cheers: :cheers:
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top