Corvette Z06 Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
48 Posts
Discussion Starter · #1 · (Edited)
Nitrous Cam and Pushrods!!

I was going to run this cam but decided to go with a different setup. Both the cam and the pushrods have never been installed. This is a great nitrous cam, a friend of mine picked up 17 mph on a 150 shot on an LS1, and put down 540 rwhp on the same 150 shot.

Comp Cams
228/232 .588/.595 114 LSA

Comp Cams Chromoly Pushrods
Stock Length

$450 firm
 

·
Registered
Joined
·
8,152 Posts
G1 is a good cam.
 

·
Registered
Joined
·
7,548 Posts
ForceFedZ06 said:
Sounds like a MTI G1 cam....
Nope...The G1 is a reverse split 228/232 .588/.575 @ 113 :thumb:
 

·
Registered
Joined
·
371 Posts
Z06Pete said:
I was going to run this cam but decided to go with a different setup. Both the cam and the pushrods have never been installed. This is a great nitrous cam, a friend of mine picked up 17 mph on a 150 shot on an LS1, and put down 540 rwhp on the same 150 shot.

Comp Cams
228/232 .588/.595 114 LSA

Comp Cams Chromoly Pushrods
Stock Length

$450 firm
Stock Length Z06 or base c5? are you willing to sell the pushrods seperately? if so how much
 

·
Moderator
Joined
·
21,378 Posts
That's basically the same cam I have and it's good for about 440 at the rear wheels with all the bolt on's. A very nice mild HP cam! :thumb:
 
1 - 11 of 11 Posts
Top