Corvette Z06 Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
528 Posts
Frank,
Is that Sherylann's car ? If it is you better hope see doesn't see it on that dyno or she'll be making you a appointment with the poodle. /phpBB/images/smiles/icon_biggrin.gif /phpBB/images/smiles/icon_biggrin.gif

_________________
Mark's Web Site
*** Harrisburg Area Zaino Distributor ***

01 Z06 -MY/BLK,Zaino,Lowered,Ripper,Halltech Tric Ti,MAG,Magic Box - No time slips yet
92 RS ProStreet Camaro (454) - Best E.T to date 10.15 @ 136 mph
 

·
Registered
Joined
·
60 Posts
Why is the # so low??? that seems waaaay off. /phpBB/images/smiles/icon_frown.gif
 

·
Registered
Joined
·
837 Posts
Frank, Thanks. That's audio is sweet.

RamAirDave, I think fcalmes' video's rwhp and rwtq numbers are in line with everything I've personally observed on Z06 dynos when they are adjusted to SAE standard. The cars typically make from the low 320's to the mid 330s.

Some Z06s, particularly from Texas, seem to produce 340s on the dynos used there. Yet those same Texas cars do not appear to produce runs at the dragstrip commensurate with their higher dyno hp/tq. Not a dig at all. Just appears likely to be dyno variation more than significant differences in the power of the cars being tested.

Have you dynoed yours? If so, what were your SAE numbers and track e.t./mph? Just curious.

Of course, it could be the case that the plant just naturally sends all the "Wednesday motors" to the Southwest base customers (TX, OK, etc). /phpBB/images/smiles/icon_wink.gif

Ranger
 

·
Registered
Joined
·
60 Posts
Hmm...Odd. I guess I havent been paying as much attention as I thought. I also forgot about STD and SAE #'s. /phpBB/images/smiles/icon_smile.gif

We are gonna try and dyno it this weekend and get some track runs in tonight. I will post the info when I get back on Monday. /phpBB/images/smiles/icon_biggrin.gif

Hopefully I will have dyno #'s for you all too. /phpBB/images/smiles/icon_wink.gif
 

·
Registered
Joined
·
588 Posts

On 2001-03-23 11:47, RamAirDave spewed forth this drivel:
Hmm...Odd. I guess I havent been paying as much attention as I thought. I also forgot about STD and SAE #'s. /phpBB/images/smiles/icon_smile.gif

We are gonna try and dyno it this weekend and get some track runs in tonight. I will post the info when I get back on Monday. /phpBB/images/smiles/icon_biggrin.gif

Hopefully I will have dyno #'s for you all too. /phpBB/images/smiles/icon_wink.gif
Wow Dave, you are everywhere! Looking forward to your results! Good luck!
 

·
Registered
Joined
·
54 Posts
Cool... I've been linked. You can see the graphs, etc. here:

http://home.earthlink.net/~omniglh/dyno.html

and some pics by following the links here:

http://home.earthlink.net/~omniglh

I don't know why the car dyno'd a little low... even Geoff (Performance Tech Center) noticed it. I figure it's due to low miles (just under 4k...) hoping once it's up over 8 I'll pick up the missing 10hp /phpBB/images/smiles/icon_smile.gif
 
1 - 10 of 10 Posts
Top