Corvette Z06 Forum banner

Column lock

2K views 7 replies 7 participants last post by  newbluez06 
#1 ·
Could I get a thumb nail intro into the column lock, its' function and weakness.

Thanks

Charlie
 
#6 ·
Is this bypassable on the '02s ??

I've looked and all the "bypasses" seem to say up to 01 only.

As soon as my Z rolls off the transporter, it's off to my lift
for a CAGS disabler, V1, Phone Install, and Column Lock bypass.

(Maybe Euro front lights too, if I get them in time)

BTW, where are the safest places to put the pads from a
2 post-asymmetrical lift under a C5?

Jim
 
#7 ·
I installed the bypass kit on my 02 with no problems. Been running great for several months now.
The kit came with a cigarette lighter adapter to temporarily power the lock and move it to the disengaged position before installing the bypass. I couldn't get that to work, so per the instructions, I just powered the car up, disengaged the lock, then disconnected it. This got me a fault code which was easily cleared, also per the instructions, by removing a designated fuse in the fuse box.
All in all, it took less than an hour to install this. Much piece of mind for me.
Aloha,
Ffen
 
#8 ·
Very interesting as I was told the bypass unit would not work on the 2002's. I took the bypass off the '98 before selling it, guess I better go ahead and try to see if it will work on the 2002 Z06.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top