[jonmor]

What is the correct torgue for the rear stabilizer. I've been told 49lb.for the upper and 70lb. for the lower and I've also been told 40lb. for both. Which is correct? Any help is appreciated. Thanks.

 

[bwhitmore]

It is definitely not 70 ft/lbs, it is more like 36 ft/lbs if I remember right, I removed mine to get my exhaust out about 2 months ago.

 

[fcalmes]

I was at my dealer last week having my stabilizer bolts replaced. The guy at the muffler shop used an impact wrench when my first set of PRTs were installed and it stretched one of the bolts. /phpBB/images/smiles/icon_mad.gif The Chevrolet Tech told me 49 lbs. for the top and 70 lbs. for the bottom. All 4 bolts were replaced.

Hope this helps.

_________________
Call today to contribute to the Z06vette.com NCM Brick! 1.800.53VETTE

Frank Calmes Quicksilver 2001 Z06
Vortex Rammer & Power Duct, B&B PRT's with Speedway Tips, Ripper Shifter with Momo Knob, Chrome Z06 Wheels

Sherylann Calmes Black 2001 Z06
Vortex Rammer & Power Duct, Chrome Z06 Wheels