Corvette Z06 Forum banner

Dyno'd my Stock Z06

2256 Views 20 Replies 13 Participants Last post by  Lew
My car has about 3K miles on it and I got it about 2 months ago. The only mod is a B&M. I dyno'd today at 330RWHP and 330RWTQ (SAE corrected). It pulled the EXACT same on each of the three pulls.

How does this compare with others? We had an Autotap on it while it ran and noticed it had 4 degrees of knock retard. Any idea why?
1 - 1 of 21 Posts
With a Vortex and B&B Prt's mine dyno'ed at 343.5hp and 344.9 ft/lbs torque. This was with 2000 miles on the car. I'll be dynoing again in about 2 weeks and with 7,000 miles on the car, I expect better numbers.
1 - 1 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.