Corvette Z06 Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,827 Posts
Discussion Starter · #1 ·
This is how I spent Sunday afternoon. I've had ceramic pads for almost 8 months, and now was a perfect time to install them with the rotors. It was pretty easy with a couple of exceptions....it requires a hard-to-find tool, and the calipers didn't clear the wheels, and needed to be remodeled. For anyone planning on this mod, first line up this tool, a 12mm socket driver that'll work on your torque wrench. I ended up making my own due to nobody having this tool, out of 7 stores stopped at. I managed to find a 12mm hex wrench, and cut off a section to use. Also ended up grinding and painting the calipers, as they did not clear the spokes on my IForged wheels. Incidentally, they were supposed to be cut for oversize brakes?? Anyhow, I'm pleased with the result.



 

·
Registered
Joined
·
17,744 Posts
Looking Good :thumb: :thumb:
 
1 - 6 of 6 Posts
Top