Corvette Z06 Forum banner
1 - 1 of 1 Posts

4 Posts
Discussion Starter · #1 ·
FS: 2004 Z06 BLK/BLK 36,500 miles - $37,500

My 2004 Z06 is for sale. Price is set at $37,500 (o.b.o.). This vehicle located in the Los Angeles area (Monrovia, CA or Rowland Heights, CA). Please send a PM or send an e-mail to [email protected] if you are interested. Thanks.


* The bank has the title, so the buyer would have to work with me and the bank to get the title transferred. *


Item Description
---- -----------
Year 2004
Make GM/Chevrolet
Model Corvette Z06
Color Black/Black (exterior/interior)
Transmission MM12 (Manual for Z06)
Purchased 3/27/2004
Miles 36,500
Warranty GM Extended, Total 6 years / 60,000 miles ($50 deductible)



Item Description
---- -----------
Reg'd Owners Original owner, purchased new in 3/2004 from dealer
VIN 1G1YY12S645120273
Registration 3/2005 TO 4/2006 Full report available



Item Description
---- -----------
Leather Seats Excellent, no tears/cracks/scratches/stains, maintained with Wolfgang/Lexol products.
Carpet Excellent, no stains, maintained with vacuum cleaner
Dashboard Excellent, no cracks/scratches, maintained with 303 products.
Radio Some scratches on front face
Everything-else Excellent, no cracks/scratches, maintained with 303 products.


Item Description
---- -----------
Body Excellent, no dents, all original
Paint Good, very glossy, no bubbles, no major scratches
- Some swirl marks, some fine scratches
- Some stone chips on front bumper cover and hood
Glass Front windshield has 2 small chips/cracks


Item Description
---- -----------
Engine Excellent
A/C Excellent
Electrical Excellent, everything fully functional



Brake Pads AC Delco Durastop Ceramic FR & RR
Wheels Original, Z06 Wheels, 17" x 9.5" FR, 17" x 10.5" RR
Tires Firestone Firehawk Wide Oval, 265/40R17 FR, 295/35R18 RR
- Just recently installed on 8/9/05
- Air compressor included, but no more bottle of white goo
Shocks Original, 2004 Z06, FE4 package
Springs Original, FE4 package
- Ride height adjusted to ~1/2inch lower
than factory using stock bolts
- Rake set at about 3/4" (rear higher than front)
Alignment Per factory specifications
- Just recently aligned on 8/9/05
Clutch Original
Exhuast Borla S-Type "Stinger" Dual-Tip
Intake Halltech Stinger w/ Warhead Single Filter
ECM/PCM Re-programmed by Jim Hall of Halltech:
- Lowered default fan-on temp from 230F to 200F
- Disabled CAGS skip-shift 1-4
- Disabled indicator light for CAGS
- Increased rev limiter from 6600rpm to 6800rpm.
- Set air/fuel ratio to 12.8:1 for Halltech Stinger intake
- See more detail at:


Extras (included in sale, but not installed in vehicle)

- Z06 Airbox & Filter
- Z06 Titanium Exhuast


1 - 1 of 1 Posts