Corvette Z06 Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
173 Posts
Discussion Starter #1
I originally posted this info on the Corvette Forum. I have had several people E-mail me privately asking about my car, so I thought I would repost the details on our' NEW' Forum, for those that might not have seen the results before.

OK Race Fans, here are the preliminary results on my car. I know that some of you have been following other posts, so here are the details. The car is not dailed-in yet & is running the stock Computer Programming. We should have a Pulley by the end of the month.The car was only driven about 6 miles to cycle the computer before the dyno & track runs. The results from the Heads/Cam pkg. are 444.6 RWHP & 419.9 RWTQ( actual), I don't have the corrected #'s right now, so I'll give you what I got. These were the #'s going to the ground last night though, corrected or not. I wasn't able to get a set of drag tires to make my runs with & the track was not prepped. My 60' times were all 2.1 or worse. I had a hard time getting out of the hole to say the least. With the Pulley, Computer tuning & a good set of drag tires ( at least a 1.7 60') we should be able to get an 11.3 @ 125 MPH out of this set-up. This package is available thru www.Hennesseymotorsports.com
Here are the dyno graphs, timeslips.& a few pics.









 

·
Registered
Joined
·
173 Posts
Discussion Starter #2
What do you think?
PS If anyone can enlarge my Dyno Graph & Time Slips for me so they are easier to see, I would appreciate it. I couldn't seem to figure it out,Z06 Junkie did it for me before.

------------------
2001 Z06 BLACK/BLACK

MAY THE TORQUE BE WITH YOU!

HENNESSEY MOTORSPORTS
Z500 #1

BEST TIME(3rd time ever @ Track & Traction limited)
11.90 @ 123.76 MPH
w/2.12 60' I NEED DRAG RADIALS!!!


[This message has been edited by DARTH VETTER (edited 01-17-2001).]
 

·
Registered
Joined
·
128 Posts
I wonder what I am going to pull with a cold air , and my Nitrous, I'm hoping for very low 11's

------------------
Dave Zehak
2001 Black ZO6
Best 1/4(so far) 12.5 at 112
"Mods"
B&M Ripper Shifter
RM racing Nitrous(not installed yet)
"Previous Vettes
1985 white Corvette coupe(auto)
1998 Silver Corvette coupe (M-6)
2000 NBM Corvette Coupe (M-6)
 

·
Registered
Joined
·
19,096 Posts
DV:

WOW that is Impressive!

Anxious to meet you and see your car run...are you planning on attending the C5 Registry Birthday Bash in BG this April?

Zippy


------------------
 

·
Registered
Joined
·
173 Posts
Discussion Starter #6
I plan to attend the CorvetteForum cruise-in Memorial Day weekend & the NCM Birthday Bash Labor Day weekend. I'm not with the C5 Registry yet.

------------------
2001 Z06 BLACK/BLACK

MAY THE TORQUE BE WITH YOU!

HENNESSEY MOTORSPORTS
Z500 #1

BEST TIME(3rd time ever @ Track & Traction limited)
11.90 @ 123.76 MPH
w/2.12 60' I NEED DRAG RADIALS!!!
 

·
Registered
Joined
·
173 Posts
Discussion Starter #7
Zman, the info will be available on his web site shortly.

------------------
2001 Z06 BLACK/BLACK

MAY THE TORQUE BE WITH YOU!

HENNESSEY MOTORSPORTS
Z500 #1

BEST TIME(3rd time ever @ Track & Traction limited)
11.90 @ 123.76 MPH
w/2.12 60' I NEED DRAG RADIALS!!!
 

·
Registered
Joined
·
1,103 Posts
DV----
Would it be to personal to post what a package like you received would run a person? Your Z looks SUPER!! Will be headed to the Birthday Bash this September following Carlisle...anxious to view your ride!! Nice Post!!

------------------
Deposit on 2002 MY Z06-First on Campbell Chevy(Bowling Green,KY)list!! Due in late July!:(
 

·
Registered
Joined
·
0 Posts
Darth,

Please leave your Z at home during the Cruise-In. I hate getting my A$$ kicked!!
JK

zman,

Here's a link that should answer your question.
http://corvetteforum.com/ubb/Forum1/HTML/034338.html



------------------
Frank Calmes Quicksilver 2001 Z06
Vortex Rammer & Power Duct, B&B PRT's with Speedway Tips, Ripper Shifter with Momo Knob, Chrome Z06 Wheels



Sherylann Calmes Black 2001 Z06
Vortex Rammer & Power Duct, Chrome Z06 Wheels



[email protected]
 
1 - 9 of 9 Posts
Top