Corvette Z06 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
396 Posts
It's gonna take a little time and a lot of 4 letter words. :(

You have to push the black plastic ducting back with your fingers and angle the piece into the opening and work it into place. It's better to get the top in place first, because if you scratch up the paint inside that opening no one will ever see it unless they lay on the ground and look up into your front brake ducts. Good Luck!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top