Corvette Z06 Forum banner

Need list of common problems for PitRoad

2082 Views 4 Replies 4 Participants Last post by  Felkebg
I'm compiling a list of problems and fixes for common Z06 tweaks. Please post any problems you have had along with their fixes to be included in the document.


1 - 1 of 5 Posts
Problem: Head liner and driver side window defrost channel showing foam.

Fix: Carefully tuck back in and use exacto to trim other excess.

Problem: 6.5 quart approximate oil capacity does not fill to dip stick "full" line.

Fix: Add 1/2 quart to 7 and verify level.

Problem: White crusty coating on exposed engine parts when near salt water.

Fix: WD 40 coating before or after.

Problem: Storage of personal items in cockpit.

Fix: Use velcro and affix items within easy reach on back deck surfaces.

Problem: Don't like BSM's after purchasing them as options.

Fix: Remove by prying off with fingers and rub loose double sided tape adhesive. Use same product to reaffix if you change your mind.

Problem: Wheel blacking sprays all over sides of car. Leaves black specs.

Fix: Q-tip and acetone to remove spots then wipe any excess material from tires (if you use another product) as tires extend beyond fenders.
See less See more
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.