Corvette Z06 Forum banner

New Circle Racing Wheel Pics Within!

1146 Views 6 Replies 6 Participants Last post by  Zippy
5
Hey guys here are some pics of the 18" X 10.5" Circle Racing wheels. They are currently about 1.5 lbs lighter than Stock, and about 1.25 lbs lighter than the CCW Wheels! Circle Racing is still lightening the production Wheel, these are prototypes... expect another lb lighter in the production wheels! Circle Racing's Phone number is 562-865-1781

Peace,





See less See more
1 - 7 of 7 Posts
Dave, What is the cost of these wheels?? Where can I get them and are other sizes avail ie 18x11, 17x11, 17x10?? Thanks in advance...Bill
I was looking for a good wheel for mounting some ET streets. I will give these guys a call.
Hey guys... Z-06 Sizes 17 X 9.5 fronts, and 18 X 10.5 Rears are 2,200. Obviously pricing would vary with bigger or smaller sizes.

Forum Moderaters: I don't know if putting pricing here is ok.. if not please feel free to edit, and Z-06 members... just Call Circle racing at the above number and ask for Mike! Tell them you saw the wheels on my car! /phpBB/images/smiles/icon_wink.gif

Take Care,
Dave
See less See more

On 2001-05-09 16:46, Dave Schotz spewed forth this drivel:
Hey guys... Z-06 Sizes 17 X 9.5 fronts, and 18 X 10.5 Rears are 2,200. Obviously pricing would vary with bigger or smaller sizes.

Forum Moderaters: I don't know if putting pricing here is ok.. if not please feel free to edit, and Z-06 members... just Call Circle racing at the above number and ask for Mike! Tell them you saw the wheels on my car! /phpBB/images/smiles/icon_wink.gif

Take Care,
Dave

That's fine, Dave. You're not trying to sell anything, you're just helping your fellow forum members.

Nice looking wheels, BTW!! /phpBB/images/smiles/icon_cool.gif
See less See more
2
Dave:

Beautiful!

Zippy /phpBB/images/smiles/icon_smile.gif /phpBB/images/smiles/icon_smile.gif
See less See more
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top