Corvette Z06 Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
1. I get a code of C1242, "BPMV pump motor ground open circuit' and 2. when pulling key from my ignition switch, my driver's seat goes to the ease of exit position. However, when unlocking with fob and putting key in ignition, the driver's seat does not return to the previous setting. Could it be possible that these two electronic issues are related? The seat is not at full back position when at my saved position. I know that will keep the seat from returning to saved position.
 
1 - 1 of 1 Posts
Top