Corvette Z06 Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
hey yall, i just bought a 94 vette for a daily driver and i am trying to program the remotes but i cant figure out how to make it work, i have been told that it is an odd procedure. if anyone could help me i would greatly appritiate it. thanks for the help lcpl bill
 

·
Registered
Joined
·
17,744 Posts
1993 to 1996

1. Place transmitter and any optional transmitter 10 feet or more away from the car.

2. Turn the ignition key to the ON position.

3. Push the TRIP/ODO button on the DIC twice.

4. Within 5 Seconds, push and hold the FUEL/INFO button on the DIC until the PKE light on the DIC comes on and stays on.

5. Turn the ignition to the OFF position, but leave the key in the ignition. Thee PKE light will come on and begin flashing. (When I programmed mine the light never flashed but everything worked )

6. Bring one transmitter into range. When the system recognizes the transmitter, the PKE light will stay on. ( I had to hit the lock button on the transmitter before it was recognized )

7. To program an optional transmitter, move the first
transmitter out of range and repeat step 6

8. Remove the key from the ignition or turn the ignition ON.

:z:
 
1 - 2 of 2 Posts
Top