Corvette Z06 Forum banner

Stock Ride Height?

6648 Views 1 Reply 2 Participants Last post by  Gordy M
Can anybody measure their stock ride height and tell me what the factory measurement is from the ground to the underside of the wheel well in the front and back, I forgot to measure before I lowered mine and I am curious just how much I got out of the lowering.
Thanks,
Brian
1 - 2 of 2 Posts
front ride height is 6.02" at measurment J and 6.22" at K These are near the attachment points on the frame rail where the car is secured for shipping.

When raising or lowering the car, it is important to get the weight distribution correct if you want to race or autocross it.
For street driving, just raise or lower it proportionately to the above. Hope this helps.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top