Corvette Z06 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter #1
From what I hear it is the white wire pin#10 on the ecu. Just wondering if this is correct. I have a 01 zo6. Need to get this installed for the spray... :jammin:
 

·
Registered
Joined
·
24 Posts
Discussion Starter #2
Also do I have to rip the hole inner fender out on the passenger side to reach the ecu. Is there another/easier spot to reach a tach signal..
 
1 - 4 of 4 Posts
Top