Corvette Z06 Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
267 Posts
Discussion Starter #1
Does anyone know if the trim height for the Z06 is different from the stock and Z-51 cars. At the Front and Rear edge the stock diminsion is 6.02 and 6.22 inches. Our club has strict rules for autocrossing and ride height is one of the determining factors for classes.
 

·
Registered
Joined
·
70 Posts
According to the GM online service manuals, it is the same for ALL corvettes, both 2000 and 2001.

Front:
from bottom of rocker 35" behind center of front wheel: 6.02" from ground

Rear:
from bottom of rocker 31" in front of rear wheel: 6.22" from ground.

Dave
 
1 - 2 of 2 Posts
Top