Corvette Z06 Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
3,213 Posts
Discussion Starter #1
In keeping with this Forum's policy, we provide this post with a link to special pricing, free shipping and free bonus items on the Vortex Rammer by BPP from Exit28 for the changed MAF sized '01 cars including Z06. Dyno tests show a 15 HP gain over stock on Z06's. More gains on the 97-00 cars will be realized due to a further restricted airbox.

Cold Air Rules!!


RG


To view photos and to join in on this GP please click here .




www.exit28motorsports.com

Click here for our Product Line

NEW CONTACT INFO FOR RG:
[email protected]
(Toll Free) 1 877 966 8676




[This message has been edited by RG in Dallas (edited 02-20-2001).]
 

·
Registered
Joined
·
128 Posts
Cold air does rule, now if I could only decide which one I am going to get.

------------------
Dave Zehak
2001 Black ZO6
Best 1/4(so far) 12.5 at 112
"Mods"
B&M Ripper Shifter
RM racing Nitrous(not installed yet)
"Previous Vettes
1985 white Corvette coupe(auto)
1998 Silver Corvette coupe (M-6)
2000 NBM Corvette Coupe (M-6)
 

·
Registered
Joined
·
3,213 Posts
Discussion Starter #3
David,

The free(er) breathing '01s get a little less benefit from a different intake. The Vortex has shown about a 15 RWHP improvement on the dyno. RFC, on the CorvetteForum sent me his results as well as seeing a few others post who have installed cold air.

RG

------------------
www.xmotorsports.com


Click here for our Forum Store
 

·
Registered
Joined
·
87 Posts
JUST ORDERED THE
Z06 TRIC/MAX AIR GEN PACKAGE


Update: Sent it back and ordered Vortex...No under hood Mod available at this time...

Doug

------------------

Douglas Perry

2001 Black/Black Z06
Chrome OEM Z06 Wheels, Vortex Ram Air Induction,Z06 High Flow Power Duct, Cags Elim., B&M Ripper/MOMO...



[This message has been edited by BLACK/BLACKZ06 (edited 02-28-2001).]
 

·
Registered
Joined
·
3,213 Posts
Discussion Starter #5
G

·
Guest
Joined
·
0 Posts
I just installed by BPP Vortex today. I had one on my 2000 Coupe as well.
There was a definite difference there. But haven't had a chance to run the Z with it yet, it's only been on the car for an hour.
Best run before the Vortex was 12.8 @ 115.
Only mod then was the Corsa Indys.
Takes only an hour or so to install it, less this time since I knew what I was doing.

Rich

------------------
'01 Black / Mod.Red
Breathless Vortex Intake
Corsa Indys w/ Pro Tips
Z06 Exhaust Plate
Lloyds Z06 Mats
Much More to come!
 

·
Registered
Joined
·
99 Posts
Rich, thanks again. You guys are great over at Xtreme. Still waiting on the "you know whats though". /ubb/smilies/smile.gif

Did the install myself last week. Took me 2 hours. The toughest thing for me was getting the MAF air sensor off /ubb/smilies/mad.gif and cutting the shroud. (I left it on for the cut).

I feel the difference especially from the lower end. Great bang for the buck Mod./ubb/smilies/smile.gif/ubb/smilies/smile.gif



------------------



2001 Quicksilver ZO6
Blk/Red interior
Ripper w/ Momo knob
Vortex Ram Air
 

·
Registered
Joined
·
28 Posts
Naaah!
Just get the Vortex, too close in comparison to spend twice as much on the Halltech. And the Vortex looks stock(if you get the black cover).

------------------
Rich Gardner
C5 Registry # Y3615
2001 Black / Mod Red
1G1YY12S115112321
Breathless Vortex Intake
West Coast PowerDuct
Corsa Indy's w/ Pro Tips
Corsa Cross-Over Pipe
Momo Combat Shifter Knob (Red)
Z06 Exhaust Plate
Lloyds Z06 Mats
Dark Tint
OEM Chrome Wheels (Coming Soon!)
 

·
Registered
Joined
·
3,213 Posts
Discussion Starter #10
<BLOCKQUOTE>quote:</font><HR>Originally posted by badtbon:
I prefer the Halltech TRIC/MAG system at www.CorvetteC5.com

It rules!

<HR></BLOCKQUOTE>

Sounds like something Jim Hall would say.


I see Jim deleted his 'water warning' associated with his bottom breather unit from the CorvetteForum. Very interesting thread he started. Lots of questions and answers in that thread on water ingestion and the halltech unit.


RG



[This message has been edited by RG in Dallas (edited 02-21-2001).]
 

·
Registered
Joined
·
1,991 Posts
As I said Vortex for me, no water problem and the best bang for the buck.
No spam.


------------------
Carl V. *****Authorized Zaino Distributor*****
Huntingdon Valley, PA.** 2000 Magnetic Red Convertible **
MN6,F45,QF5,AQ9,AG2,CJ2,T96,B34,AAB,UN0,U1S,JL4,UV6,T82,N37
** Corvette Club of Delaware Valley **

www.hcvind.com
E-Mail: [email protected]
 

·
Registered
Joined
·
128 Posts
RG, he deleated it because people were bashing him, I think his product is great, but he was bashed because, by creating his topic, he contradicted everything he said in the past, he really had to put his foot in his mouth on that one, I think alot of people lost faith in him, I think its a shame, because he has a good product, but people thought they were being lied to all that time , so I guess I could see their point in bashing him. One thing that also bothered me was that it seems every other week he invents something new then claims how much more hp you can get with his new version, when in reality there is no more gain than the last greatest product, you can only take so much bull.

------------------
Dave Zehak
2001 Black ZO6
Best 1/4(so far) 12.5 at 112
"Mods"
B&M Ripper Shifter
RM racing Nitrous(not installed yet)
"Previous Vettes
1985 white Corvette coupe(auto)
1998 Silver Corvette coupe (M-6)
2000 NBM Corvette Coupe (M-6)

[This message has been edited by DaveZehak (edited 02-23-2001).]
 

·
Registered
Joined
·
3,213 Posts
Discussion Starter #15
That is true nate...but, we are in the same location with the same phone numbers. Matt, Chris, Tracy and I, at toll free: 877 966 8676.

Take care,

RG

------------------


www.exit28motorsports.com

Click here for our Product Line

NEW CONTACT INFO FOR RG:
[email protected]
(Toll Free) 1 877 966 8676


[This message has been edited by RG in Dallas (edited 02-23-2001).]
 
1 - 15 of 15 Posts
Top