What is a FRC Partition?
1 - 6 of 6 Posts
Joined
·
183 Posts
Thats a good ? but i dont know either. Where did you hear that term and what are you refering to. I might be able to find that out for you later today.
RedZ
RedZ
Go here guys for the description and pictures.
http://www.xmotorsports.com/interior-exterior/
Most of our supporting vendors carry this product.
_________________
Call today to contribute to the Z06vette.com NCM Brick! 1.800.53VETTE
Frank Calmes Quicksilver 2001 Z06
Vortex Rammer & Power Duct, B&B PRT's with Speedway Tips, Ripper Shifter with Momo Knob, Chrome Z06 Wheels
![]()
Sherylann Calmes Black 2001 Z06
Vortex Rammer & Power Duct, Chrome Z06 Wheels
![]()
http://www.xmotorsports.com/interior-exterior/
Most of our supporting vendors carry this product.
_________________
Call today to contribute to the Z06vette.com NCM Brick! 1.800.53VETTE
Frank Calmes Quicksilver 2001 Z06
Vortex Rammer & Power Duct, B&B PRT's with Speedway Tips, Ripper Shifter with Momo Knob, Chrome Z06 Wheels
Sherylann Calmes Black 2001 Z06
Vortex Rammer & Power Duct, Chrome Z06 Wheels
So then, its main benefit is to "seal off" the trunk from the passenger compartment so that the A/C can work more efficiently and
cut down on exhaust noise. Does it also make the stereo sound better, not just easier to hear, but actually better quality sound reproduction?
What if you want to install a harness bar? Does the FRC Partition get in the way.
Having trouble visualizing how this all goes together as I don't yet have a Z06.
In another related post someone stated it was a difficult installation to make by yourself. Apparently there is drilling required. Where and why?
For those of you that have already put it in your cars, do you think it is worth the price of $399?
cut down on exhaust noise. Does it also make the stereo sound better, not just easier to hear, but actually better quality sound reproduction?
What if you want to install a harness bar? Does the FRC Partition get in the way.
Having trouble visualizing how this all goes together as I don't yet have a Z06.
In another related post someone stated it was a difficult installation to make by yourself. Apparently there is drilling required. Where and why?
For those of you that have already put it in your cars, do you think it is worth the price of $399?
Check it out....
If you go to www.corvetteforum.com you can look under the ZO6 forum and read all the pro/cons.
I think the guy complaining about the install was just to large to fit in the rear of his car.
The 2 small holes(7/64) are for the snap mounts.Thats all you have to do.
Hope this helps...
If you go to www.corvetteforum.com you can look under the ZO6 forum and read all the pro/cons.
I think the guy complaining about the install was just to large to fit in the rear of his car.
The 2 small holes(7/64) are for the snap mounts.Thats all you have to do.
Hope this helps...
1 - 6 of 6 Posts
