Corvette Z06 Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,991 Posts
David, the column lock problem has been around for all the year's the C5 has been made, you will have to take it to the dealer so they can replace the column lock, after you do that you can get a column lock bypass from c5 Solutions, this part lies to the computer and does not let the column lock ever again. I was one of the first people to install this item and while friend were having their cars flat bedded to the dealer I never had the problem, the next thing that will happen to your car because of the column lock is that you will be getting flat bedded to the dealer, I would get your car to the dealer ASAP for them to replace your column lock, you can get the C5 Solution bypass from several vendors including Auto Buffs www.autobuffs.net FYI GM did away with the column lock on the automatic 2001 Vettes.

------------------
Carl V. *****Authorized Zaino Distributor*****
Huntingdon Valley, PA.** 2000 Magnetic Red Convertible **
MN6,F45,QF5,AQ9,AG2,CJ2,T96,B34,AAB,UN0,U1S,JL4,UV6,T82,N37
** Corvette Club of Delaware Valley **

www.hcvind.com
E-Mail: [email protected]
 

· Registered
Joined
·
1,991 Posts
Zippy, I personally heard Dave Hill say that after all the 99' column lock problems that the 2000 would use different parts, not only were the same parts used the part numbers were still the same, and I have heard of at least 3 different 01' cars that has had problems.

------------------
Carl V. *****Authorized Zaino Distributor*****
Huntingdon Valley, PA.** 2000 Magnetic Red Convertible **
MN6,F45,QF5,AQ9,AG2,CJ2,T96,B34,AAB,UN0,U1S,JL4,UV6,T82,N37
** Corvette Club of Delaware Valley **

www.hcvind.com
E-Mail: [email protected]
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top