Corvette Z06 Forum banner

ZO6 alignment specs anyone??

2K views 6 replies 3 participants last post by  Ranger 
#1 ·
Thanks Frank, you saved me a drawn out post.


------------------


Quicksilver Z06 KN w/Modified Air Box
 
See less See more
2
#2 ·
<BLOCKQUOTE>quote:</font><HR>Originally posted by Dennis Jurs:
Thanks Frank, you saved me a drawn out post.


<HR></BLOCKQUOTE>

Dennis, once you get into the site and find 2001 Corvette, do a search for alignment and the info will appear.




------------------
Frank Calmes Quicksilver 2001 Z06
Vortex Rammer & Power Duct, B&B PRT's with Speedway Tips, Ripper Shifter with Momo Knob, Chrome Z06 Wheels



Sherylann Calmes Black 2001 Z06
Vortex Rammer & Power Duct, Chrome Z06 Wheels



f-calmes@worldnet.att.net
 
#3 ·
The 01 service manual does NOT contain the alignment specs for the ZO6. I have obtained them from H.H. and will post if anyone is interested. Would do so now, but I have to go to work.

------------------


Quicksilver Z06 KN w/Modified Air Box
 
#5 ·
Front Individual Toe +0.04 degree +/- 0.10 degree

Front Sum Toe +0.08 degree +/- 0.20 degree

Front Individual Caster +6.9 degree +/- 0.50 degree

Front Cross Caster within +/- 0.25 degree

Front Individual Camber -0.70 degree +/-0.50
degree

Front Cross Camber within +/-0.25 degree

Rear Individual Toe -0.01 degree +/- 0.10 degree

Rear Sum Toe -0.02 degree +/- 0.20 degree

Rear Individual Camber -0.68 degree +/- 0.50 degree

Rear Cross Camber within +/- 0.50 degree
 
#6 ·
Frank to the rescue, again. /phpBB/images/smiles/icon_biggrin.gif
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top