BlackWS602 said:
thanks for the tips guys. One thing I've kept reading and reading in many different threads is matching revs. Can I get that explained alittle more?
Rev-matching is the process of changing the rpms of the engine to the speed required for gear you are shifting into. This way when you let out the clutch it does not disrupt the balance of the car.
When you upshift and pause for a split second to allow the rpms to drop to match the next gear this is a form of rev-matching. when you get it right you can let out the clutch as fast as you want without upsetting the car.
On downshifting it is a little trickier. What you do is blip the throttle to raise the rpms while the clutch is pressed in to raise engine rpms to that of the next lower gear. Done right you can let out the clutch as fast as you want without upsetting the car.
This revmatching is 1/2 of the heel to maneuver. Once you have the rev-matching down the next step is to combine with braking.
When to use: I use it all of the time on the street to provide a smoother drive and put less stress on the drivetrain. Plus it is like training for the track where I heel-toe. Some claim to heel to on the street but I find it hard to do if I am not braking hard.
If you want to try: start by driving down a high way in 6th gear try going from 6th to 5th as smooth as possible. A blindfolded passenger should not know you shifted. Once you get this down try to go from 5th to 4th 4th to 3rd at different speeds at different rpms. It takes a while but is quite rewarding when done right. :cheers: